TURBO DIESEL DIGITECH 3 DUMP Recirculation Diverter BLOW OFF VALVE BOV KIT

TURBO DIESEL DIGITECH 3 DUMP Recirculation Diverter BLOW OFF VALVE BOV KIT 

BOV :  
UNIVERSAL INLET/OUTLET OD 1" 
Surface treatment: Hard anodized
Material: Made of T6 Aviation aluminum
We offer different springs and washers fit for different pressures
GREEN: 5-15PSI
Yellow: 15-23PSI(pre install)
BLUE: 23-30 PSI
RED: +30 PSI

APPLICATION:  Universal
This is a Universal fitment kit, this means it is non specific to a particular vehicle but designed to work on the majority of Turbo Diesel engines.
It does not mean it can be fitted out of the box and work perfectly to a certain vehicle with direct installation, it is not vehicle specific.
We have fitted hundreds of these to many vehicles from VW and Audis to Range Rovers and BMW's with 100percent success rate and all happy customers!
Professional fitment ONLY. No warranty for DIY fits

Diesel engines that are turbochargers can experience compressor surge when coming off the throttle. 
The BOV controller can vent this build up of pressure, protecting the turbocharger. This can reduce 
the amount of rebuilds on your turbocharger as well as improve acceleration between gears.
 
The BOV controller is an electronic device which controls the pressure signal to the BOV. 
It works by detecting a 0-5 voltage change in throttle position sensor. It then energizes a solenoid 
to vent all of the air out of the BOV cap, causing a pressure differential between the piston of the 
BOV and the cap which will vent pressure from the intake system.
 
This kit contains the very latest DIGITECH Gen3 Control Module with the latest firmware 
upgrade resulting in real time valve response time. 

==============================================================================